EROWA UPC
Very precise and extremely secure
With a repeatability of 2 µm, the EROWA UPC (Universal Power Chuck) palletizing system leaves no wish unfulfilled in terms of precision.
Whether to palletize large workpieces on milling machines or to machine small workpieces on die-sinking EDM machines; the UPC palletizing system has the flexibility to handle most machining situations.
The base for all types of workpiece carriers
Vices, gauges and fixtures are mounted on the UPC pallet. These are now fully integrated in the EROWA UPC palletizing system.
Suitable for different workpiece sizes
The UPC 2.0 chuck with the integrated ITS chuck ensures seamless integration of EROWA ITS 50 or ITS 100 workpiece carrier in the UPC system. This combination enables the flexible use of the clamping system depending on the part size.
Large and secure clamping surface
The widely spaced support surfaces of the UPC 2.0 chuck make the palletizing system extremely tilt-proof. On a clamping surface of up to 500 x 500 mm, large workpieces can be easily mounted on the UPC pallet.
Highest performance
With 50 kN clamping force and optional reclamping function (80 kN) for all chuck types, the UPC holds everything that needs to be held.
Perfectly sealed
The special rubber seal reliably protects the UPC 2.0 chuck against the penetration of chips and liquids. The contact surfaces are cleaned automatically and thoroughly with air.
Low construction height
The low construction height of the UPC 2.0 chuck with pallet leaves much space for workpieces.
Highest compatibility
The UPC 2.0 chucks have a mounting hole pattern for mounting options on almost any machine table without additional adjustment.
Individual air control
Due to the adapter flange on the rear for individual air control, the UPC 2.0 chuck 320 x 300 can be mounted directly on the machine table (no intermediate plate required).
Automation with EROWA robots
The UPC palletizing system is consistently automatable. We will be happy to advise you on a tailored automation solution.