0
0
Support
Products Clamping Systems VPC (Vise Power Clamp) VPC Chuck 52
ER-155772

VPC Chuck 52

with base plate 176 x 230 mm

Technical data

Technical data for VPC Chuck 52
Number of lines min. 2 (opening & reclamping) | Optional: + 1 (for cleaning and combined locking & presence check)
Operation With control unit or compressed air gun
Indexing 4 x 90°
Reclamping pressure 6 bar pneumatic
Reclamping Required
Opening pressure 6 bar pneumatic
Repeatability < 0.003 mm
Clamping power 18'000 N
Clamping mechanism Spring force, clamped without pressure
Pitch 52 mm
Workpiece size up to 160 x 160 x 160 mm
Product Family VPC (Vise Power Clamp)
Product Category Chuck
Technologies
Chip-removing processes
Chip-removing processes
Applications
Manual Operation
Manual Operation
Operate with compressed air jet
Operate with compressed air jet
Operate using the manual control unit
Operate using the manual control unit
Operate using the electropneumatic control unit
Operate using the electropneumatic control unit
Suitable for automated use
Suitable for automated use

Downloads

User Manual

Further information

Description
Automatable chuck with a 52mm pitch. Including base plate L 176 x W 230 x H 65 mm.
Connections
Laterally and from below (option): for opening, reclamping and cleaning/presence check.
Mounting Interface
To accommodate workpiece holders, pallets and fixtures which have been prepared with a 52mm pitch and VPC chucking spigots 52.
Installation
Mounting hole pattern for 50mm/M12 grid and for machine table with a T-slot distance of 50/63/80/100mm (bolts and T-nuts are not included in the package supplied).
Options
Chuck control possible from below with a suitable adapter (on request).
Back to overview

Unlock the Full Potential of Your Production with EROWA Solutions

Contact