EROWA Wire EDM Tooling
Quick and precise resetting
The basis of the EROWA Wire EDM tooling system is constituted by the chucks that are fitted to the machine table and aligned. As soon as a workpiece has been fixed to and set up on a system carrier (fixture, clamping element, etc.), it is ready for production!
Palletized workpieces can be loaded with positional accuracy within seconds. Unproductive setting-up work is carried out while the machine is at work. The machine's production time increases significantly.
The wire EDM tooling system can be automated. A large selection of EROWA handling facilities provides a suitable solution for every application. We’ll be glad to advise you!
Universal from setting up to WEDM
The next order is prepared while the machine is working. Setting-up work can be carried out carefully and without any time pressure. Machining times decrease substantially since no setting-up work has to be done on the machine.
Precise presetting, i.e. the determination of the starting borehole coordinates, the determination of workpiece positions or carrying out a quick interim correction substantially simplifies any subsequent work.
Prepared workpiece carriers/clamping frames can be clamped into the chucks on the machine table in a few steps with the help of a loading facility or an EROWA Robot. EROWA Wire EDM chucks position the workpiece carriers in a stable way, and changes from one chuck to another can be carried out with a repeatability of 0.002mm.
Increasing production time
If the machines are run during marginal hours and at night, this will strongly increase productivity.
Our 20 years of experience with more than 2,000 installed Robots speaks for itself.