EROWA ITS Toolingsystem
Tech. specs. pneumatic ITS chucks
| Description | pneumatic | pneumatic with re-clamping |
|---|---|---|
| System sizes | 50 and 100 | 50 and 100 |
| Repeating accuracy | 0.002 mm | 0.002 mm |
| Indexing | 4 x 90° | 4 x 90° |
| Clamping force | 2'500 N | 7'000 N |
| Locking by | Springforce | Springforce plus 6 bar pressure |
| Opening | Compressed air min. 6 bar | Compressed air min. 6 bar |
| Recommended size of workpiece | up to 140 x 140 x 140 mm | uo to 140 x 140 x 140 mm |
| Operation | Air jet, pneum. switch, manual control unit | Air jet, pneum. switch, manual control unit |
Cross section ITS chuck
Highlights
- Reliable mechanism with ball lock. Clamping force of 7000 N. Remains locked if if pressure fails.
- Surface of the supporting feet is cleaned by airblast at the moment of locking. This even works if submerged in fluid.
- After pre-centering, the reference position is reached only if the centering plate is flexed over the prisms.
