New! W20 Collet sleeve
The sleeve for W20 standard collets. The workpiece, clamped in the collet, may be transferred from one operation to another, without loosing the reference position.
With the flick of a switch, the sleeve and workpiece are released from the chuck. Pneumatic operation of the collet through the chuck.
Collet Tooling System – a collet chuck for every case
A simple solution has been found.
Cylindrical parts must be positioned with reliable repeatability. Safety in the machining process of small series with changing parts is only possible if operation is easy.
With the CTS-W20, collet chucks are operated reliably and always with the same clamping power. And if it is necessary to change the diameter quickly, this can be done at the push of a button.
The defined reference position for collet chucks: with the CTS Collet Tooling System, workpieces can be positioned with precision, while quick changes from one form to another are still possible.
Applications of the Collet Tooling System
In watchmaking, the CTS has been in operation for some years. An increasing number of applications are also being found for other areas of manufacturing.
Thanks to its slim design, the CTS is ideally suited for integration into dividing heads or spindle noses.
Hardly noticed, but with great success, the CTS is used in the machining of small parts, with applications in watchmaking, on rotary transfer machines in electronics, and in the manufacture of wood-cutting tools.